Understanding Angular’s $apply() and $digest()

For expert-led online Angular training courses you can’t go past Ultimate Angular by Todd Motto. Try his courses here, and use the code SITEPOINT to get 25% off and to help support SitePoint.

$apply() and $digest() are two core, and sometimes confusing, aspects of AngularJS. To understand how AngularJS works one needs to fully understand how $apply() and $digest() work. This article aims to explain what $apply() and $digest() really are, and how they can be useful in your day-to-day AngularJS programming.

$apply and $digest Explored

AngularJS offers an incredibly awesome feature known as two way data binding which greatly simplifies our lives. Data binding means that when you change something in the view, the scope model automagically updates. Similarly, whenever the scope model changes, the view updates itself with the new value. How does does AngularJS do that? When you write an expression ({{aModel}}), behind the scenes Angular sets up a watcher on the scope model, which in turn updates the view whenever the model changes. This watcher is just like any watcher you set up in AngularJS:

$scope.$watch('aModel', function(newValue, oldValue) {
//update the DOM with newValue
});

The second argument passed to $watch() is known as a listener function, and is called whenever the value of aModel changes. It is easy for us to grasp that when the value of aModel changes this listener is called, updating the expression in HTML. But, there is still one big question! How does Angular figure out when to call this listener function? In other words, how does AngularJS know when aModel changes so it can call the corresponding listener? Does it run a function periodically to check whether the value of the scope model has changed? Well, this is where the $digest cycle steps in. It’s the $digest cycle where the watchers are fired. When a watcher is fired, AngularJS evaluates the scope model, and if it has changed then the corresponding listener function is called. So, our next question is when and how this $digest cycle starts. The $digest cycle starts as a result of a call to $scope.$digest(). Assume that you change a scope model in a handler function through the ng-click directive. In that case AngularJS automatically triggers a $digest cycle by calling $digest(). When the $digest cycle starts, it fires each of the watchers. These watchers check if the current value of the scope model is different from last calculated value. If yes, then the corresponding listener function executes. As a result if you have any expressions in the view they will be updated. In addition to ng-click, there are several other built-in directives/services that let you change models (e.g. ng-model, $timeout, etc) and automatically trigger a $digest cycle. So far, so good! But, there is a small gotcha. In the above cases, Angular doesn’t directly call $digest(). Instead, it calls $scope.$apply(), which in turn calls $rootScope.$digest(). As a result of this, a digest cycle starts at the $rootScope, and subsequently visits all the child scopes calling the watchers along the way. Now, let’s assume you attach an ng-click directive to a button and pass a function name to it. When the button is clicked, AngularJS wraps the function call within $scope.$apply(). So, your function executes as usual, change models (if any), and a $digest cycle starts to ensure your changes are reflected in the view. Note: $scope.$apply() automatically calls $rootScope.$digest(). The $apply() function comes in two flavors. The first one takes a function as an argument, evaluates it, and triggers a $digest cycle. The second version does not take any arguments and just starts a $digest cycle when called. We will see why the former one is the preferred approach shortly.

When Do You Call $apply() Manually?

If AngularJS usually wraps our code in $apply() and starts a $digest cycle, then when do you need to do call $apply() manually? Actually, AngularJS makes one thing pretty clear. It will account for only those model changes which are done inside AngularJS’ context (i.e. the code that changes models is wrapped inside $apply()). Angular’s built-in directives already do this so that any model changes you make are reflected in the view. However, if you change any model outside of the Angular context, then you need to inform Angular of the changes by calling $apply() manually. It’s like telling Angular that you are changing some models and it should fire the watchers so that your changes propagate properly. For example, if you use JavaScript’s setTimeout() function to update a scope model, Angular has no way of knowing what you might change. In this case it’s your responsibility to call $apply() manually, which triggers a $digest cycle. Similarly, if you have a directive that sets up a DOM event listener and changes some models inside the handler function, you need to call $apply() to ensure the changes take effect. Let’s look at an example. Suppose you have a page, and once the page loads you want to display a message after a two second delay. Your implementation might look something like the JavaScript and HTML shown in the following listing.

See the Pen fukyn by Sandeep Panda (@Sandeep92) on CodePen.

By running the example, you will see that the delayed function runs after a two second interval, and updates the scope model message. Still, the view doesn’t update. The reason, as you may have guessed, is that we forgot to call $apply() manually. Therefore, we need to update our getMessage() function as shown below.

See the Pen bEmBn by Sandeep Panda (@Sandeep92) on CodePen.

If you run this updated example, you can see the view update after two seconds. The only change is that we wrapped our code inside $scope.$apply() which automatically triggers $rootScope.$digest(). As a result the watchers are fired as usual and the view updates. Note: By the way, you should use $timeout service whenever possible which is setTimeout() with automatic $apply() so that you don’t have to call $apply() manually. Also, note that in the above code you could have done the model changes as usual and placed a call to $apply() (the no-arg version) in the end. Have a look at the following snippet:

$scope.getMessage = function() {
setTimeout(function() {
$scope.message = 'Fetched after two seconds';
console.log('message:' + $scope.message);
$scope.$apply(); //this triggers a $digest
}, 2000);
};

The above code uses the no-arg version of $apply() and works. Keep in mind that you should always use the version of $apply() that accepts a function argument. This is because when you pass a function to $apply(), the function call is wrapped inside a try...catch block, and any exceptions that occur will be passed to the $exceptionHandler service.

How Many Times Does the $digest Loop Run?

When a $digest cycle runs, the watchers are executed to see if the scope models have changed. If they have, then the corresponding listener functions are called. This leads to an important question. What if a listener function itself changed a scope model? How would AngularJS account for that change? The answer is that the $digest loop doesn’t run just once. At the end of the current loop, it starts all over again to check if any of the models have changed. This is basically dirty checking, and is done to account for any model changes that might have been done by listener functions. So, the $digest cycle keeps looping until there are no more model changes, or it hits the max loop count of 10. It’s always good to stay idempotent and try to minimize model changes inside the listener functions. Note: At a minimum, $digest will run twice even if your listener functions don’t change any models. As discussed above, it runs once more to make sure the models are stable and there are no changes.

Conclusion

I hope this article has clarified what $apply and $digest are all about. The most important thing to keep in mind is whether or not Angular can detect your changes. If it cannot, then you must call $apply() manually.

Frequently Asked Questions (FAQs) about AngularJS’s $apply and $digest